Skip to content
Stainless Steel Kitchen Sink

Brand

KRAUS Stainless Steel Sinks: The Models We Could Verify

We could verify two KRAUS sinks from its own spec papers: the KHU100-32 undermount and the KHF200 farmhouse line. The undermount is our main pick on this whole site. The farmhouse is our steel apron pick, but plan on extra cabinet room.

by the editorial teamupdated November 3, 20262 min read

Disclosure: This page contains affiliate links (marked with *). If you buy through them, we earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more

AI-generated image: a granite countertop edge above a brushed stainless steel undermount sink.
Image: AI-generated (OpenAI)

In short

The KRAUS sinks we verified are the KHU100-32, an undermount with one 10-inch-deep bowl in 16-gauge steel for a 36-inch cabinet, and the KHF200 farmhouse line in 30, 33 and 36 inch widths. Take the KHU100-32 for a solid counter. Take the KHF200-33 for a steel apron front. We couldn't verify other KRAUS models, so they aren't on this site.

On this page
Our pick: undermountAd

KRAUS

KRAUS KHU100-32

One big, deep bowl in thick steel for a solid countertop.

Why here: It's the KRAUS we'd start with, and the main pick on this whole site.

Best for: Solid counters and a 36-inch cabinet, when you want room for big pans.

  • 16-gauge steel with pads and undercoating
  • 10-inch depth and one 30-inch-wide bowl
  • Bottom grid and basket strainer included
  • Rear drain placement, which keeps the pipes farther back
  • Not for standard laminate counters
  • Needs a cabinet 24 inches front to back as well as 36 wide
  • No ledge or cutting board
View on Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on AmazonLearn more
Mounting
Undermount
Minimum cabinet
36 in wide, 24 in front to back
Outside size
32 × 19 in
Bowl
30 × 17 in, single
Bowl depth
10 in
Material
16-gauge stainless steel
In the box
Bottom grid, basket strainer, template, hardware, towel
Price class
Mid-range

The two we verified

Comparison: KRAUS KHU100-32, KRAUS KHF200-33
ComparisonOur pick: undermountKRAUS KHU100-32Our pick: stainless farmhouseKRAUS KHF200-33
MountingUndermountApron-front, set under the counter
Minimum cabinet36 in wide, 24 in front to back33 in in the 2020 manual; 2017 guide says 3 in wider than the sink
Outside size32 × 19 in32-7/8 × 20-3/4 × 10 in
Bowl30 × 17 in, singleSingle
Bowl depth10 in–
Material16-gauge stainless steel16-gauge stainless steel, per listing
In the boxBottom grid, basket strainer, template, hardware, towelBottom grid, basket strainer, template
Price classMid-rangePremium
Best forSolid counters and a 36-inch cabinet, when you want room for big pans.A farmhouse look without the worry of a chipped bowl, in a cabinet built for it.
On Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on AmazonOn Amazon(paid link to Amazon, opens in a new tab)Ad · paid link · check price & delivery on Amazon
Specs as stated by the makers or the named sources. No prices here: they move daily, so check the listing. Swipe sideways on a phone.

KRAUS KHU100-32

The bowl is 30 by 17 inches and 10 inches deep, with the drain at the rear center. The sheet lists a 3-1/2-inch drain opening, cUPC certification and a limited lifetime warranty. It asks for a cabinet 36 inches wide and 24 inches front to back. We say more on the undermount page.

Buy it if you have a solid counter and want one big bowl. Skip it if your counter is laminate.

KRAUS KHF200

The farmhouse sink in steel, sold in 30, 33 and 36 inch widths. The manual warns against laminate and recommends a licensed professional, and it describes the whole install, which you can read in our overview.

KRAUS's 2020 manual and its 2017 guide give different cabinet advice. The farmhouse page shows both, and we'd plan on a 36-inch base for the 33-inch sink.

Buy it if you want the apron look in a material with no glaze. Skip it if you can't rebuild your cabinet front.

What's not here

KRAUS sells many more sinks. We dropped the ones we couldn't verify, including the Kore, because the KRAUS product pages we tried wouldn't open. If you're looking at another model, use the checks on the best sinks page against its sheet.

Compared with other makers

Ruvati has more on the ledge and double-bowl side, and Kohler has the dual-mount Task. For one big bowl, we'd still start with the KRAUS KHU100-32*.

Asked before buying

Are KRAUS sinks any good?

We can only speak to what KRAUS publishes. Its sheet for the KHU100-32 lists 16-gauge steel, NoiseDefend undercoating and pads, cUPC certification and a limited lifetime warranty. We don't use buyer reviews and haven't used these sinks ourselves, so we compare them on those statements.

What does KRAUS say about caring for its sinks?

Clean weekly with mild, ammonia-free soap, rinse with lukewarm water and dry with a microfiber cloth. Use a vinegar-soaked cloth for hard water, then rinse and dry. Don't use abrasive powders, bleach, ammonia, alcohol or chlorine, and no steel wool or wire brushes.

Why isn't the Kraus Kore on your list?

We couldn't confirm its details from a KRAUS page, because the product pages we tried wouldn't open. Rather than guess, we left it out. That says nothing about whether it's a good sink. If you're considering it, compare its spec sheet with the checks on our undermount page.

Where this comes from

Read next

Not sure? Three quick questions

Who writes this

stainlesssteelkitchensink.com Editorial Team

Kitchen sinks & fit

We are the editorial team at stainlesssteelkitchensink.com. We read makers' spec sheets, install manuals and care guides and turn them into plain-English buying advice, with sources on every page. We do not run lab tests, and we say so openly.

  • Spec sheets & standards read
  • Sources on every page
  • No lab tests – stated openly
  • Publisher details in the imprint

About usHow we compare